Small-batch validation · inquiries open

Force Analyzer

A wired USB force-acquisition kit with an L6B-H-300g sensor, 24-bit AD7190 hardware, live plots, tare, recording, and CSV export.

For R&D testing, teaching, fixture validation, and small contact-force measurement; not for trade settlement, medical diagnosis, or personal-safety protection.

Ask about standard / custom builds See availability boundary

Force Analyzer kit with aluminum acquisition unit, white sensor enclosure, and L6B-H sensor

Standard range300 g · ≈ 2.94 N

Sample modes10 Hz · 100 Hz

Power12 V DC

Reference price¥1,299 / kit

One kit connects the sensor to live plots and CSV data for small-force acquisition and recording

Force Analyzer V5.0.1 is a wired USB force-acquisition kit combining a ZEMIC L6B-H-300g sensor, an ESP32-S3 and 24-bit AD7190 aluminum acquisition unit, a 3D-printed enclosure, and desktop software.

It suits contact force, pressing force, slow loading, teaching, research, and fixture validation. The desktop app combines live readings, rolling and cumulative plots, tare, filtering, statistics, threshold-triggered recording, and CSV export. Other ranges, data formats, protocols, cables, and software interfaces can be customized.

02 / System chain

Four delivered parts connect applied force to a visible trace

The standard configuration refers to the current 300 g kit; custom items are confirmed separately.

L6B-H sensor

The current standard model is L6B-H-300g with a white 3D-printed enclosure; other ranges can be customized.

24-bit acquisition

An AD7190 sigma-delta ADC sits in an aluminum enclosure, connecting to the sensor through an aviation connector and to the computer over USB-B.

Two sample modes

10 Hz is intended for static or slowly varying force; 100 Hz captures faster loading changes and general dynamic trends.

Calibration and desktop software

Each delivered kit is calibrated; the app supports live readings, two plot views, tare, filtering, statistics, threshold recording, multipoint calibration, and CSV export.

03 / Hardware and software

Engineering hardware and a real running interface

The hero is a polished render based on the physical structure; the views below retain the engineering unit and actual software state.

Physical Force Analyzer acquisition unit in a silver aluminum enclosure — Aluminum acquisition unit with separate USB-B, 12 V DC, power switch, and sensor connector interfaces.

ZEMIC L6B-H 300 g single-point load cell — Current standard sensor: L6B-H-300g. Sensor datasheet specifications are not presented as whole-system measurements.

Real Force Analyzer desktop interface showing live force, plots, statistics, and recording controls — Real desktop interface with live readings, rolling and cumulative plots, statistics, tare, filtering, and recording in one view.

04 / Pricing and customization

The standard kit has reference pricing; custom work is scoped separately

This site provides reference pricing and an inquiry route only. Final Xianyu price, stock, shipping, and delivery timing follow the specific listing and order discussion.

Standard kit reference

Xianyu display reference: ¥1,299 per kit
Suggested transaction range: ¥999–1,199 per kit
Early T01 reference: ¥899–999 per kit
Final price depends on range, included items, software delivery, and support scope

Customization reference

Simple protocol or data-format customization: add ¥300–800
Desktop software customization: from ¥1,000
Special ranges, enclosures, cables, and connectors are quoted separately
Inquiries are open; this site does not take payment or promise a fixed delivery date

05 / Accuracy boundary

Sensor datasheet specifications stay separate from whole-system performance

Installation, loading direction, temperature, vibration, power, sampling mode, and calibration all affect the final result.

L6B-H datasheet

H-class combined error: ≤ ±0.010%FS
Repeatability: ≤ ±0.015%FS
Rated range: 300 g; output sensitivity: 0.9 ± 0.1 mV/V
These are sensor-only specifications, not a whole-system guarantee under every condition

Whole-system delivery boundary

Each kit is calibrated against its paired sensor before delivery
Actual performance follows the calibration and test result for that specific unit
Not intended for trade settlement, medical diagnosis, or personal-safety protection
Avoid overload, lateral impact, and incorrect mounting

06 / Specifications and package

Confirmed facts for the current standard kit

Sensor: ZEMIC L6B-H-300g · other ranges available by customization
ADC: ADI AD7190 · 24-bit Σ-Δ
Sample rates: 10 Hz · 100 Hz
Power: 12 V DC
Computer interface: USB-B · USB-A to USB-B cable included
Included accessories: Sensor enclosure, USB cable, 12 V adapter, desktop software, and calibration data
Desktop systems: macOS 14+ / Apple Silicon; Windows 10 / 11 installer availability must be confirmed before ordering
Customization: Sensor range, protocol, data format, software UI, cables, and connectors

07 / Public and delivery status

Product details and reference prices are public; checkout, software download, and source remain closed

Standard and custom inquiries are open; configuration, software build, test boundary, and delivery timing are confirmed per order.

Current route

Inquiry by public email; no on-site checkout

This page documents the current hardware, software, and calibration boundaries; it does not promise stock, fixed delivery time, or unconfirmed compatibility.

Send an inquiry

For range, mounting, sampling, or integration questions, include the expected load, environment, operating system, and target delivery time. View support information